K2 8.1.1 Channel DSP Amplifier – B&O A2B Plug-N-Play Kit Ford Bronco

(2 customer reviews)

$1,859.00

The mObridge Ford Bronco amplifier kit provides seamless integration with your Ford Bronco’s SYNC 4 infotainment system to enhance your vehicle’s listening experience. This is a Bronco specific kit for our 9 Channel K2 A2B amplifier. This amplifier replaces the factory amp.

This is a full plug and play kit – everything needed to complete the install of the amplifier in your Bronco is included in the kit and no wires need to be cut! The amp comes with a basic tune with crossover points and time alignment set, but this is fully adjustable to suit any aftermarket speakers via our tuning tool mObridge DSP.

Powered by a Blackfin DSP, the mObridge A2B amplifier provides 8.1.1 channels of advanced DSP and amplification, allowing for an unprecedented level of audio quality in your Bronco.

Harness the power of the DSP by using the USB connection to connect it to the mObridge DSP user interface for online firmware updates, full configuration and customization of the audio processing including channel mapping, parametric EQ, crossovers, channel filters, time-alignment, master/channel gain control, and many other features.

The mObridge A2B amplifier is a complete DSP and amplifier solution, with advanced DSP algorithms and 8.1 channel amplification. If only A2B conversion and DSP processing is required without amplification, the DA-G2 A2B Ford series of products can be used.

Email first if you have a 2 door Bronco. sales@mobridge.us

SKU: 2032-bronco Categories: ,

This is a plug and play Ford Bronco amplifier kit that has been specifically designed to interface seamlessly into 2021-2024 Ford Broncos fitted with the B&O system. This amplifier provides unprecedented control and audio reproduction. It boasts a 10 channel DSP, 9 channels of amplification and over 1100W RMS/2200W Peak total output.

Plug and Play (PNP)

This kit includes EVERYTHING needed for the amplifier install. No wires need to be cut or spliced, this kit mounts the amp in the factory location and uses all existing factory speaker wire for a true stealth install. The amp will come pre-tuned with crossover points and time alignment, the tune is also fully user adjustable to suit whatever speakers are installed, including conversions to 6.5inch speakers in the rear pods.

  • Fuse to amplifier power wire
  • Fuse to battery wire
  • Fuse
  • ACM speaker wire T-Harness harness (to make use of the factory wiring for the center speaker and read pods)
  • Amplifier mounting bracket
  • Mounting bolts
  • CAN and Speaker wire harness (for all other speakers)

Blackfin DSP

The heart of the device is a 533MHz Blackfin Digital Signal Processor (DSP). With it, the mObridge A2B amplifier is capable of concurrently running advanced DSP algorithms on all 8.1.1 channels. It provides full access to channel mapping, channel summing, parametric crossovers, a 1024 point graphic equalizer, channel high/low/band-pass filters, phase inversion, time alignment, master/channel gain control, centre channel upmixing algorithms, in-vehicle preset control, and many other features.

8.1 Channel Amplification with Additional Subwoofer Pre-out
The mObridge A2B amplifier features 8x full-range outputs, a dedicated subwoofer channel, and an additional subwoofer pre-out - perfect for all other aftermarket amplifiers.

  • 6x 140W Channels @ 4 ohms | 70W RMS
  • 2x 300W Channels @ 4 ohms | 150W RMS
  • 1x 500W Subwoofer Channel @ 4 ohms (or 800W @ 2 Ohms) | 250w RMS & 400w RMS
  • 1x 4V RCA pre-out
  • <0.01%THD
  • 105db SNR

The subwoofer pre-out provides a 4V output to give you the flexibility to add a secondary powered subwoofer to enhance your audio experience further.

Ultra Efficient Sound

This amplifier runs a 4-phase, intelligent variable power supply feeding top of the line D Class chips that run at over 90% efficiency, this allows for a surprisingly small form factor while also packing some serious punch. Because of the advanced gate drive correction of these chips, not only is this amplifier super efficient, it also recreates sound with near perfect accuracy. This amplifier is perfect for a stealth install to keep that factory look while also providing breathtaking sound.

Seamless Integration

The mObridge A2B amplifier interfaces seamlessly with the controls of the vehicle. Volume, fade, balance, bass, and treble remain completely controllable via the existing vehicle controls, and all factory audio such as parking sensors, navigation, voice, and telephone are integrated to behave exactly as per the original system. This means that unlike other integration options, there is no need for mounting of any additional controls inside the vehicle. The vehicle will look and feel stock, with exceptional audio quality.

mObridge DSP User Interface

The mObridge A2B amplifier utilizes the mObridge DSP desktop application for Windows/macOS to harness the full potential of the DSP. The application is also able to provide automatic online firmware updates.

Note: This product is only compatible with Ford Bronco vehicles equipped with A2B B&O audio systems.

For questions about fitment and installation, email sales@mobridge.us, Subject: "Plug and play a2b amplifier for Ford Bronco B&O"

Or join the discussion at: https://www.bronco6g.com/forum/threads/hi-all.69025/

2 reviews for K2 8.1.1 Channel DSP Amplifier – B&O A2B Plug-N-Play Kit Ford Bronco

  1. Josh Drainville (verified owner) –

    Night and day improvement to the B&O nightmare in the Bronco. I have a ’23 Wildtrak and I can definitely tell the difference. I also installed a kicker 8″ into the stock enclosure and the amp has plenty of power for it. I have been extremely happy with the great customer service Mobridge has provided. I’ve had several questions since this is a new product, and they have been there to answer everything right away!

  2. Eric (verified owner) –

    Anyone who has a stock B&O system in the Bronco knows the frustration that goes along with it. This amp/system is by far the best solution out there if you want to do it right and have the most control over tuning your system. Not only is the system easy to install with the plug-and-play configuration, but it sounds amazing and is designed to have enough power to drive whatever you can throw at it. Most importantly, the mObridge Support Team has been by far the best support team I’ve ever worked with. They stand by their products and are diligent in assisting with any issues or questions during install, system updates, etc.

Add a review
Make Model Generation Configuration Year
Ford Bronco SUV Sync 4 with B&O amplifier 2021 - 2024
  • Plug and play speaker harness connector (18AWG)
  • Battery to fuse wire (4AWG)
  • Fuse to amp wire (6AWG)
  • Ground Lead (6AWG)
  • ACM wiring harness (6 Core 18AWG)
  • USB Cable (3ft)
  • Stainless steel mounting plate
  • Amp mounting bolts (4xM6
  • Amp user manual
  • Zip ties
  • Nut for battery terminal (10MM)
Documents Firmware Updates
Tune Presets
  • No tune presets available

Related products