K2 8.1.1 Channel DSP Amplifier – A2B Plug-N-Play Kit Ford F150 B&O Regular
$1,859.00
The mObridge Ford F-150 amplifier kit provides seamless integration with your Ford’s SYNC 4 infotainment system to enhance your vehicle’s listening experience. This is a F-150 specific kit for our 9 Channel K2 A2B amplifier. This amplifier replaces the factory amp.
This is a full plug and play kit – everything needed to complete the install of the amplifier in your F-150 is included in the kit and no wires need to be cut! The amp comes with a basic tune with crossover points and time alignment set, but this is fully adjustable to suit any aftermarket speakers via our tuning tool mObridge DSP.
Powered by a Blackfin DSP, the mObridge A2B amplifier provides 8.1.1 channels of advanced DSP and amplification, allowing for an unprecedented level of audio quality in your F-150.
Harness the power of the DSP by using the USB connection to connect it to the mObridge DSP user interface for online firmware updates, full configuration and customization of the audio processing including channel mapping, parametric EQ, crossovers, channel filters, time-alignment, master/channel gain control, and many other features.
The mObridge A2B amplifier is a complete DSP and amplifier solution, with advanced DSP algorithms and 8.1 channel amplification. If only A2B conversion and DSP processing is required without amplification, the DA-G2 A2B Ford series of products can be used.
This is a plug and play Ford F-150 amplifier kit that has been specifically designed to interface seamlessly into 2018+ Ford F-150 fitted with the B&O system. This amplifier provides unprecedented control and audio reproduction. It boasts a 10 channel DSP, 9 channels of amplification and over 1100W RMS/2200W Peak total output.
Plug and Play (PNP)
This kit includes EVERYTHING needed for the amplifier install. No wires need to be cut or spliced, this kit mounts the amp in the factory location and uses all existing factory speaker wire for a true stealth install. The amp will come pre-tuned with crossover points and time alignment, the tune is also fully user adjustable to suit whatever speakers are installed, including conversions to 6.5inch speakers in the rear pods.
- Fuse to amplifier power wire
- Fuse to battery wire
- Fuse
- Left and right tweeter wires
- Amplifier mounting bracket
- Mounting bolts
- CAN and Speaker wire harness (for all other speakers)
Blackfin DSP
The heart of the device is a 533MHz Blackfin Digital Signal Processor (DSP). With it, the mObridge A2B amplifier is capable of concurrently running advanced DSP algorithms on all 8.1.1 channels. It provides full access to channel mapping, channel summing, parametric crossovers, a 1024 point graphic equalizer, channel high/low/band-pass filters, phase inversion, time alignment, master/channel gain control, centre channel upmixing algorithms, in-vehicle preset control, and many other features.
8.1 Channel Amplification with Additional Subwoofer Pre-out
The mObridge A2B amplifier features 8x full-range outputs, a dedicated subwoofer channel, and an additional subwoofer pre-out - perfect for all other aftermarket amplifiers.
- 6x 140W Channels @ 4 ohms | 70W RMS
- 2x 300W Channels @ 4 ohms | 150W RMS
- 1x 500W Subwoofer Channel @ 4 ohms (or 800W @ 2 Ohms) | 250w RMS & 400w RMS
- 1x 4V RMS RCA pre-out
- <0.01%THD
- 105db SNR
The subwoofer pre-out provides a 4V RMS output to give you the flexibility to add a secondary powered subwoofer to enhance your audio experience further.
Ultra Efficient Sound
This amplifier runs a 4-phase, intelligent variable power supply feeding top of the line D Class chips that run at over 90% efficiency, this allows for a surprisingly small form factor while also packing some serious punch. Because of the advanced gate drive correction of these chips, not only is this amplifier super efficient, it also recreates sound with near perfect accuracy. This amplifier is perfect for a stealth install to keep that factory look while also providing breathtaking sound.
Seamless Integration
The mObridge A2B amplifier interfaces seamlessly with the controls of the vehicle. Volume, fade, balance, bass, and treble remain completely controllable via the existing vehicle controls, and all factory audio such as parking sensors, navigation, voice, and telephone are integrated to behave exactly as per the original system. This means that unlike other integration options, there is no need for mounting of any additional controls inside the vehicle. The vehicle will look and feel stock, with exceptional audio quality.
mObridge DSP User Interface
The mObridge A2B amplifier utilizes the mObridge DSP desktop application for Windows/macOS to harness the full potential of the DSP. The application is also able to provide automatic online firmware updates.
- Windows/macOS: mObridge DSP application
Note: This product is only compatible with Ford F-150 vehicles equipped with A2B B&O audio systems.
For questions about fitment and installation, email sales@mobridge.us, Subject: Plug and play a2b amplifier for Ford F-150 B&O
1 review for K2 8.1.1 Channel DSP Amplifier – A2B Plug-N-Play Kit Ford F150 B&O Regular
You must be logged in to post a review.
| Make | Model | Generation | Configuration | Year |
|---|---|---|---|---|
| Ford | F-150 | Pickup | Sync 3/Sync 4 with B&O or Revel amplifier | 2018 - 2024 |
- Plug and play speaker harness connector (18AWG)
- Battery to fuse wire (4AWG)
- Fuse to amp wire (6AWG)
- Ground Lead (6AWG)
- USB Cable (3ft)
- Stainless steel mounting plate
- Amp mounting bolts (4xM6)
- Amp user manual
- RHS tweeter wire
- LHS tweeter wire
- No updates available
- No tune presets available
L33der (verified owner) –
2 words. ABSOLUTELY AMAZING! From function, to build quality, to after sales support; mObridge is top notch in all aspects. 2024 F150 B&O 8 Speaker System: Morel Ultra Tempo 692 Components in Front Doors/A-Pillars. Modified defrost panel to accept Morel Virtus Nano Carbon MM2 Mids in the Corner Dash pockets. The mObridge K2 was simple plug and play for the most part. All you have to do is run some power cable and the Tweeter wires, very simple. Full, detailed instructions included w/ color photos. In my setup, I used the Spare and Center Channels to power the Mids in the dash. I simply cut and spliced the Center Channel for the Right Mid and used the Spare Channel for the Left Mid. RCA Pre-Out (2) 12″ Subs powered with 1700W Class D Amp. The K2 provides clean and stable power. Very efficient and rarely gets hot for such a small package. Since my Truck is so new, my chimes only come through the IC speaker instead of the Door/Dash speakers. A firmware update is in the works to resolve this. Not a big deal whatsoever. All other factory functions are flawless. I can’t understand why anyone would spend several thousand dollars more to convert their Ford B&O system, when the mObridge K2 is the simplest and most cost effective option on the market, IMO. GUI of the DSP is very simple and intuitive, yet feature rich. If you are in the market to upgrade your B&O 8 or 14 Speaker system into a concert hall, this is a no brainer. Of course grab some Morel Speakers. After Sales support was excellent and very informative. Fraser offered to remote into my Laptop to show me around the DSP and to grab some logs for enabling the Chimes in a future F/W update. I learned more from Fraser about tuning in an hour, then I did from several hours of YouTube videos and various forums. A couple hours in REW and I had my system sounding superb! I can’t say enough good things about the product and the support you receive. mObridge better hang on to Fraser, as he is an invaluable asset to mObridge and their Customers. Try and find that level of support from other Car Audio Brands.